Difference between revisions of "WaterColorBot Reference Design"

From Evil Mad Scientist Wiki
Jump to: navigation, search
(WaterColorBot Hardware Reference Design)
Line 5: Line 5:
  
  
The WaterColorBot is an Open Source Hardware project.  You can download the Hardware Reference Design for the WaterColorBot [http://shop.emscdn.com/wiki/watercolor/general/wcb_refdesign.zip here] (135 kB .zip archive).
+
The WaterColorBot is an Open Source Hardware+Software project.  You can download the Hardware Reference Design for the WaterColorBot [http://shop.emscdn.com/wiki/watercolor/general/wcb_refdesign.zip here] (135 kB .zip archive).
  
  
 
The design consists of 7 Inkscape SVG files, containing the design for the different custom-manufactured parts, sketches from which those designs are derived, and a bill of materials.
 
The design consists of 7 Inkscape SVG files, containing the design for the different custom-manufactured parts, sketches from which those designs are derived, and a bill of materials.
 +
 +
=== License ===
 +
 +
This reference design is dual-licensed under the Creative Commons [http://creativecommons.org/licenses/by-sa/3.0/us/ CC-BY-SA-3.0 license] and under the [http://www.tapr.org/OHL TAPR OHL]; you may use it under the terms of EITHER license. 
 +
 +
=== Trademarks ===
 +
 +
The names "WaterColorBot," "Evil Mad Scientist," and "Evil Mad Scientist Laboratories" are
 +
trademarks of Evil Mad Science LLC.
 +
 +
As the WaterColorBot design is open source, you can make, modify, and sell hardware based on this reference design, but ''please respect
 +
our trademarks.''  If you make and sell hardware based on this design, it is your responsibility
 +
to clearly identify who made it-- for simple reasons of liability and customer support.
 +
 +
 +
 +
== EiBotBoard Documentation ==
 +
 +
The [http://www.schmalzhaus.com/EBB/ EBB] controller board that drives the WaterColorBot is documented separately.  (The EBB is also an Open Source Hardware+Software project.)

Revision as of 14:01, 26 November 2013

wcb_tn.jpg This wiki page is part of the documentation for the WaterColorBot.
Click here to return to the WaterColorBot overview.


WaterColorBot Hardware Reference Design

The WaterColorBot is an Open Source Hardware+Software project. You can download the Hardware Reference Design for the WaterColorBot here (135 kB .zip archive).


The design consists of 7 Inkscape SVG files, containing the design for the different custom-manufactured parts, sketches from which those designs are derived, and a bill of materials.

License

This reference design is dual-licensed under the Creative Commons CC-BY-SA-3.0 license and under the TAPR OHL; you may use it under the terms of EITHER license.

Trademarks

The names "WaterColorBot," "Evil Mad Scientist," and "Evil Mad Scientist Laboratories" are trademarks of Evil Mad Science LLC.

As the WaterColorBot design is open source, you can make, modify, and sell hardware based on this reference design, but please respect our trademarks. If you make and sell hardware based on this design, it is your responsibility to clearly identify who made it-- for simple reasons of liability and customer support.


EiBotBoard Documentation

The EBB controller board that drives the WaterColorBot is documented separately. (The EBB is also an Open Source Hardware+Software project.)