Editing Egg-Bot Pro ユーザーガイド

Jump to: navigation, search

Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 121: Line 121:
  
 
=== ペンを差し込んで位置を確認する  [http://shop.emscdn.com/KitInstrux/eggbot/ebp-docsrevA1.pdf#page=9 (P.9)] ===
 
=== ペンを差し込んで位置を確認する  [http://shop.emscdn.com/KitInstrux/eggbot/ebp-docsrevA1.pdf#page=9 (P.9)] ===
: 他のモーター(卵とペン)をオフにして、EggBotを「ペンアップ」状態にします。これを行う最善の方法は、「設定」タブからEggbotコントロールを使用することです(§3.3のように)。ただし、「ペンを上げてモーターをオフにする」アクションを選択します。
 
 
: (もう1つの方法は、ポップアップメニューに[ペンを上げる]オプションがある[手動]タブからです。)
 
 
: ペンをホルダーに挿入し、ナイロンつまみねじで所定の位置に固定します。表面の真上にくるまでペンを下げます。ペンを固定するナイロン製のつまみねじ、真鍮製のペンの高さのつまみねじ、または2つの組み合わせ(A、B)を使用することができます。
 
 
: 繰り返しますが、目標は、ペンの腕が下がり、卵が卵の上に描かれているときに、腕が水平になって死ぬことです。
 
 
: テールストックの端から見て、ペンが下がっているときは、ペンの先端が中心線の方を向いているはずです。必要に応じて、ペンモーターシャフトの止めネジ(C)を緩めて、ペンアームをペンモーターに近づけたり離したりすることができます。
 
 
 
: 最後の「プリフライト」チェックは、印刷可能面の全範囲にわたってペンアームを手動で動かすことです(D)。
 
 
: あなたがそうするように、いくつかのことをチェックしてください:
 
 
: 1)ペンの腕が動きの妨げにならない範囲で動いていることを確認してください。
 
 
: 2)サーボケーブルが全範囲にわたって自由に動くことを確認してください。
 
 
: 3)以下のように、ペン先が移動範囲全体にわたって、表面からかなり一定の高さになるようにします。
 
  
 
== EggBot Proの使い方  [http://shop.emscdn.com/KitInstrux/eggbot/ebp-docsrevA1.pdf#page=10 (P.10)]==
 
== EggBot Proの使い方  [http://shop.emscdn.com/KitInstrux/eggbot/ebp-docsrevA1.pdf#page=10 (P.10)]==

Please note that all contributions to Evil Mad Scientist Wiki are considered to be released under the GNU Free Documentation License 1.3 (see Evil Mad Scientist Wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To edit this page, please answer the question that appears below (more info):

Cancel | Editing help (opens in new window)