Difference between revisions of "Eggbot Troubleshooting"

From Evil Mad Scientist Wiki
Jump to: navigation, search
m
m
Line 28: Line 28:
 
<div id="anothercuradj">
 
<div id="anothercuradj">
 
;As soon as I plot, the pen arm swings to one end or the other of my egg and stays there
 
;As soon as I plot, the pen arm swings to one end or the other of my egg and stays there
:If, when you start a plot, the pen arm swings to one extreme end or the other of your egg and stays there, then you may need to adjust the current to your stepper motors.  See [[Eggbot Troubleshooting|stairsteps]] for help on adjusting the stepper motor current.
+
:If, when you start a plot, the pen arm swings to one extreme end or the other of your egg and stays there, then you may need to adjust the current to your stepper motors.  See [[Eggbot Troubleshooting#stairsteps|stair steps]] above for help on adjusting the stepper motor current.
  
:It is also possible that you are plotting a drawing whose vertical drawing coordinates are outside of the expected coordinate range for y-coordinate values.  Check to make sure that your Inkscape drawing page does not have an excessive height via the "Document Properties" item of the File menu.  A drawing height in excess of 1000 pixels is suspect.  Even heights of 1000 pixels or less still may require care in framing.  See [[[framing and pen centering]] for assistance with framing.  Also, make sure that you are using v2.1 or later of the Eggbot Control extension.  It supports arbitrary y-coordinate range offsets.  With v2.0 and earlier, the y-coordinate values could not stray far outside of the range [0,&nbsp;1000] (i.e., couldn't be offset too far from y=500).
+
:It is also possible that you are plotting a drawing whose vertical coordinates are outside of the expected range for y-coordinate values.  Check to make sure that your Inkscape drawing page does not have an excessive height.  Use the "Document Properties" item of the File menu to check the drawing's height.  A drawing height in excess of 1000 pixels is suspect.  Even heights of 1000 pixels or less still may require care in framing.  See [[Framing and Pen Centering|framing and pen centering]] for assistance with framing.  Also, make sure that you are using v2.1 or later of the Eggbot Control extension.  It supports arbitrary y-coordinate range offsets.  With v2.0 and earlier, the y-coordinate values cannot stray far outside of the range [0,&nbsp;1000].
 
</div>
 
</div>
  
Line 36: Line 36:
 
<div id="mirrored">
 
<div id="mirrored">
 
;Mirrored text
 
;Mirrored text
If your text appears "mirrored" (e.g., inverted from left to right) then first check the assembly directions to ensure that you have wired the egg motor correctly.  Check that the ordering of the colored wires matches the picture.  if they do not, then correct their ordering and try replotting.  If you are sure that they are wired correctly then everything is still okay: some stepper motors are just backwards.  From the Eggbot Control extension, check (or uncheck) the "Reverse motion of Motor 2 (egg)" checkbox on the "Options" tab.  Then click the "Apply" button.  Then plot your test again.  If things are still reversed, then make sure that your change to the setting took effect.  If there is still an issue, then perhaps you need to instead or also change the "Reverse motion of Motor 1 (pen)" setting. Note that after doing an upgrade of the Eggbot extensions, it is possible for this setting to get lost.  In that case, simply set it again and save it with the Apply button.
+
:If your text appears "mirrored" (e.g., inverted from left to right) then first check the assembly directions to ensure that you have wired the egg motor correctly.  Check that the ordering of the colored wires matches the picture.  if they do not, then correct their ordering and try replotting.  If you are sure that they are wired correctly, then everything is still okay: some stepper motors are just backwards.  From the Eggbot Control extension, check (or uncheck) the "Reverse motion of Motor 2 (egg)" checkbox on the "Options" tab.  Next, click the "Apply" button to save this settingNow, plot your test again.  If things are still reversed, then make sure that your change to the setting took effect.  If there is still an issue, then perhaps you need to instead or also change the "Reverse motion of Motor 1 (pen)" setting. Note that after doing an upgrade of the Eggbot extensions, it is possible for this setting to be lost.  In that case, simply set it again and save it with the "Apply" button.
 
</div>
 
</div>
  
Line 42: Line 42:
 
<div id="upsidedown">
 
<div id="upsidedown">
 
;Upside down text
 
;Upside down text
Is your text plotting upside down?  First, let us be clear: the (vertical) top of your Inkscape drawing should correspond to the pole of your egg closest to the egg motor.  That is the end of your egg closest to the Eggbot's headstock.  With this orientation in mind, if your text is plotting upside down then change the "Reverse direction of Motor 1 (egg)" setting.  This setting is under the "Options" tab of the Eggbot Control extension.  After changing the setting, click the Apply button to save your setting.  Note that after doing an upgrade of the Eggbot extensions, it is possible for this setting to get lost.  In that case, simply set it again and save it with the Apply button.</div>
+
:Is your text plotting upside down?  First, let us be clear: the (vertical) top of your Inkscape drawing should correspond to the pole of your egg closest to the egg motor and headstock.  With this orientation in mind, if your text is plotting upside down then change the "Reverse direction of Motor 1 (egg)" setting.  This setting is under the "Options" tab of the Eggbot Control extension.  After changing the setting, click the "Apply" button to save your setting.  Note that after doing an upgrade of the Eggbot extensions, it is possible for this setting to be lost.  In that case, simply set it again and save it with the "Apply" button.</div>
  
  
 
<div id="ellipses">
 
<div id="ellipses">
 
;Circles look elliptical
 
;Circles look elliptical
Are your circles or other figures looking squashed?  This can be expected once you realize that the Eggbot doesn't attempt to do any special transformations on your drawings when it plots them.  As such there's two immediate sources of distortion when plotting your drawings.  First, the horizontal component of line segments become physically shorter as they approach either pole of your drawing object.  This is a consequence of the diminishing circumference of circles of latitude with increasing latitude (i.e., decreasing distance from either pole).  A second effect comes into play when plotting on non-spherical objects such as eggs.  Eggs are longer in one dimension than the other.  Typically longer from pole to pole than they are wide.  This means that a single step of the pen arm produces a longer stroke than a single step of the egg motor. As such, a vertical line in your Inkscape drawing can produce a longer stroke than a horizontal line of the same length, even at the egg's equator.
+
:Are your circles or other figures looking squashed?  This can be expected once you realize that the Eggbot doesn't attempt to do any special transformations on your drawings when it plots them.  Consequently, there are two immediate sources of distortion when plotting your drawings.  First, the horizontal component of line segments become physically shorter as they approach either pole of your egg or sphere.  This is a consequence of the diminishing circumference of your egg or sphere as the poles are approached.  A second effect comes into play when plotting on non-spherical, eillipsoidal objects such as eggs which are longer from pole to pole than they are wide.  This means that a single step of the pen arm produces a longer stroke than a single step of the egg motor. As such, a vertical line in your Inkscape drawing can produce a longer stroke than a horizontal line of the same length.  The net result is that objects will appear horizontally flattened when drawn on eggs.
  
:To counter this effect, you can try horizontally stretching your drawing by upwards of 150%.  To do this
+
:To counter this effect, try horizontally stretching your drawing by upwards of 150%.  To do this
 
* Use the "Select All in All Layers" item of Inskcape's Edit menu.
 
* Use the "Select All in All Layers" item of Inskcape's Edit menu.
 
* Then, under the Object menu, choose the "Transform" item.
 
* Then, under the Object menu, choose the "Transform" item.
Line 60: Line 60:
 
<div id="precision">
 
<div id="precision">
 
;Ends don't meet in plots
 
;Ends don't meet in plots
:When the ends of figures do not line up, this strongly suggests an alignment or slippage problem with how your egg has been secured into the Eggbot chassis.  To check the alignment, rotate your egg with the motors disengaged and see if there is any perceptible wobble.  Sometimes it helps to life the Eggbot up and sigh down the long axis of the egg as you turn it.  As regards slippage, the egg needs to be held in tightly by the tailstock spring.  That spring should be compressed around two-thirds or more (but not fully compressed).  See [[Improving precision|improving precision]] for many more tips on improving your plots.
+
:When the ends of figures do not line up, this strongly suggests an alignment or slippage problem with.  To check the alignment, rotate your egg with the motors disengaged and see if there is any perceptible wobble.  It's important that the egg be well centered in the egg cups, otherwise, the egg may precess a bit as it is rotated.  Sometimes it helps to lift the Eggbot up and sight down the long axis of the egg as you turn it.  As regards slippage, the egg needs to be held in tightly by the tailstock spring.  That spring should be compressed around two-thirds or more (but not fully compressed).  See [[Improving precision|improving precision]] for many more tips on alignment and other factors which will influence the quality of your plots.
 
</div>
 
</div>
  
Line 68: Line 68:
 
;I cannot get my plots framed the way I want them
 
;I cannot get my plots framed the way I want them
 
;Plots do not center correctly
 
;Plots do not center correctly
:If you are having difficulty with framing or centering, see [[framing and pen centering]].
+
:If you are having difficulty with framing or centering, see [[Framing and Pen Centering|framing and pen centering]].
 
</div>
 
</div>
  
Line 75: Line 75:
 
;"Paste in place" results in a bitmap copy (OS X)
 
;"Paste in place" results in a bitmap copy (OS X)
 
;"Paste in place" doesn't place the object in its original location (OS X)
 
;"Paste in place" doesn't place the object in its original location (OS X)
:On Macs, if your "Paste" or "Paste in Place" operations are resulting in bitmaps being imported into your Inkscape drawing, then you need to change your X11 preferences.  X11 is the windowing system which Inkscape runs to manage its windows.  If you click on any running Inkscape window, you will see in the Apple menu bar along the top of your screen the menu item "X11" just to the right of the Apple-icon menu item. Click on the X11 menu and select the "Preferences..." item.  In the resulting popup "X11 Preferences" window, select the "Pasteboard" tab.  In the resulting option set, unset the item "Update Pasteboard when CLIPBOARD changes".  
+
:On Macs, if your "Paste" or "Paste in Place" operations are resulting in bitmaps being imported into your Inkscape drawing, then you need to change your X11 preferences.  X11 is the windowing system which Inkscape uses to manage its windows.  If you click on any running Inkscape window, you will see in the Apple menu bar along the top of your computer screen the menu item "X11".   Click on the X11 menu and select the "Preferences" item.  In the resulting popup "X11 Preferences" window, select the "Pasteboard" tab.  Next, unset the item "Update Pasteboard when CLIPBOARD changes".
  
 
:Another symptom of this problem is that the "Paste in Place" operation does not paste the copied object back to its original location; instead it appears elsewhere on your drawing page.  Furthermore, you can check to see if a bitmap was pasted by looking at the "Edit" menu.  If the "Undo" item indicates that an "import" was done, then a bitmap was imported.
 
:Another symptom of this problem is that the "Paste in Place" operation does not paste the copied object back to its original location; instead it appears elsewhere on your drawing page.  Furthermore, you can check to see if a bitmap was pasted by looking at the "Edit" menu.  If the "Undo" item indicates that an "import" was done, then a bitmap was imported.

Revision as of 21:19, 29 December 2010

If you are having difficulty with your first plots, don't panic: there are a couple of minor "setup" issues which may occur with some stepper motors. And, as you have likely seen in photos, the Eggbot produces very precise plots. By observing some basic guidelines, you can achieve the same results. And, if the pointers below do not cover your situation, be sure to search these wiki pages and avail yourself of the other support resources.


Stair steps
Loud stepper motors
Does your plot appear to have "stair steps" or jagged lines? Are the stepper motors loud or whining? You likely need to adjust the "Current Adjust" control on the EBB board with a small screwdriver. This is a physical control -- a potentiometer -- on the EBB circuit board mounted to your Eggbot chassis. The control is labelled "CUR ADJ" on the board. If the current is too strong or too weak you may see (or hear) these symptoms. The current increases as you rotate the control counter-clockwise (CCW). Starting with the control turned all the way clockwise (CW), both motors should be very weak. As you increase the current -- turning the control with a small screw driver CCW -- you should be able to feel the motors increasingly resist moving by your hand. The ideal setting is one that provides smooth, relatively low-noise moves from the stepper motors, but has enough torque that the pen arm is not "floppy". Often, this is about half way CCW, maybe a little less. More current, while increasing the motors torque, leads to jerky moves, with position errors (e.g., stair steps).
NOTE: the stepper motors are the two large, metal encased motors which mount to the Eggbot's chassis. One rotates the egg while the other rotates the proximal pen arm. The smaller, plastic encased motor which raises and lowers the distal pen arm is a "servo motor". It's behavior is not controlled by the current adjustment.


As soon as I plot, the pen arm swings to one end or the other of my egg and stays there
If, when you start a plot, the pen arm swings to one extreme end or the other of your egg and stays there, then you may need to adjust the current to your stepper motors. See stair steps above for help on adjusting the stepper motor current.
It is also possible that you are plotting a drawing whose vertical coordinates are outside of the expected range for y-coordinate values. Check to make sure that your Inkscape drawing page does not have an excessive height. Use the "Document Properties" item of the File menu to check the drawing's height. A drawing height in excess of 1000 pixels is suspect. Even heights of 1000 pixels or less still may require care in framing. See framing and pen centering for assistance with framing. Also, make sure that you are using v2.1 or later of the Eggbot Control extension. It supports arbitrary y-coordinate range offsets. With v2.0 and earlier, the y-coordinate values cannot stray far outside of the range [0, 1000].


Mirrored text
If your text appears "mirrored" (e.g., inverted from left to right) then first check the assembly directions to ensure that you have wired the egg motor correctly. Check that the ordering of the colored wires matches the picture. if they do not, then correct their ordering and try replotting. If you are sure that they are wired correctly, then everything is still okay: some stepper motors are just backwards. From the Eggbot Control extension, check (or uncheck) the "Reverse motion of Motor 2 (egg)" checkbox on the "Options" tab. Next, click the "Apply" button to save this setting. Now, plot your test again. If things are still reversed, then make sure that your change to the setting took effect. If there is still an issue, then perhaps you need to instead or also change the "Reverse motion of Motor 1 (pen)" setting. Note that after doing an upgrade of the Eggbot extensions, it is possible for this setting to be lost. In that case, simply set it again and save it with the "Apply" button.


Upside down text
Is your text plotting upside down? First, let us be clear: the (vertical) top of your Inkscape drawing should correspond to the pole of your egg closest to the egg motor and headstock. With this orientation in mind, if your text is plotting upside down then change the "Reverse direction of Motor 1 (egg)" setting. This setting is under the "Options" tab of the Eggbot Control extension. After changing the setting, click the "Apply" button to save your setting. Note that after doing an upgrade of the Eggbot extensions, it is possible for this setting to be lost. In that case, simply set it again and save it with the "Apply" button.


Circles look elliptical
Are your circles or other figures looking squashed? This can be expected once you realize that the Eggbot doesn't attempt to do any special transformations on your drawings when it plots them. Consequently, there are two immediate sources of distortion when plotting your drawings. First, the horizontal component of line segments become physically shorter as they approach either pole of your egg or sphere. This is a consequence of the diminishing circumference of your egg or sphere as the poles are approached. A second effect comes into play when plotting on non-spherical, eillipsoidal objects such as eggs which are longer from pole to pole than they are wide. This means that a single step of the pen arm produces a longer stroke than a single step of the egg motor. As such, a vertical line in your Inkscape drawing can produce a longer stroke than a horizontal line of the same length. The net result is that objects will appear horizontally flattened when drawn on eggs.
To counter this effect, try horizontally stretching your drawing by upwards of 150%. To do this
  • Use the "Select All in All Layers" item of Inskcape's Edit menu.
  • Then, under the Object menu, choose the "Transform" item.
  • In the sub-window which appears on the right edge of the Inkscape window, select the "Scale" tab.
  • Set the horizontal scale factor to 150% and the vertical to 100%; ensure that the "Scale proportionally" box is not checked.
  • Click the "Apply" button.


Ends don't meet in plots
When the ends of figures do not line up, this strongly suggests an alignment or slippage problem with. To check the alignment, rotate your egg with the motors disengaged and see if there is any perceptible wobble. It's important that the egg be well centered in the egg cups, otherwise, the egg may precess a bit as it is rotated. Sometimes it helps to lift the Eggbot up and sight down the long axis of the egg as you turn it. As regards slippage, the egg needs to be held in tightly by the tailstock spring. That spring should be compressed around two-thirds or more (but not fully compressed). See improving precision for many more tips on alignment and other factors which will influence the quality of your plots.


Plots run off the top or bottom of my egg
I cannot get my plots framed the way I want them
Plots do not center correctly
If you are having difficulty with framing or centering, see framing and pen centering.


"Paste in place" results in a bitmap copy (OS X)
"Paste in place" doesn't place the object in its original location (OS X)
On Macs, if your "Paste" or "Paste in Place" operations are resulting in bitmaps being imported into your Inkscape drawing, then you need to change your X11 preferences. X11 is the windowing system which Inkscape uses to manage its windows. If you click on any running Inkscape window, you will see in the Apple menu bar along the top of your computer screen the menu item "X11". Click on the X11 menu and select the "Preferences" item. In the resulting popup "X11 Preferences" window, select the "Pasteboard" tab. Next, unset the item "Update Pasteboard when CLIPBOARD changes".
Another symptom of this problem is that the "Paste in Place" operation does not paste the copied object back to its original location; instead it appears elsewhere on your drawing page. Furthermore, you can check to see if a bitmap was pasted by looking at the "Edit" menu. If the "Undo" item indicates that an "import" was done, then a bitmap was imported.


Clicking "Apply" in the Eggbot Control extension does nothing (Windows XP)