Difference between revisions of "ISP Shield Assembly Instructions"

From Evil Mad Scientist Wiki
Jump to: navigation, search
(Created page with "{| border="1" cellspacing="0" cellpadding="5" | |Line |refdes |Name |Description |Vendor |Part Number |Quantity per Board |---- |1 |J1 thru J4 |Arduino Headers, six and eight pin...")
 
Line 1: Line 1:
 +
== Bill of Materials ==
 +
 
{| border="1" cellspacing="0" cellpadding="5" |
 
{| border="1" cellspacing="0" cellpadding="5" |
 
|Line
 
|Line
|refdes
+
|Ref Des
|Name
 
 
|Description
 
|Description
 +
|Type
 
|Vendor
 
|Vendor
|Part Number
+
|Vendor Part Number
|Quantity per Board
+
|Quantity per Kit
 
|----
 
|----
 
|1
 
|1

Revision as of 21:09, 22 March 2011

Bill of Materials

Line Ref Des Description Type Vendor Vendor Part Number Quantity per Kit
1 J1 thru J4 Arduino Headers, six and eight pin, two of each Evil Mad Science 633 1
2 J5 Target Power Enable, Header 3 pin Right Angle 0.1” spaced header Digikey TSW-103-25-F-SRA-ND 1
3 Target Power Enable, Jumper 2 pin jumper block for 0.1” header Digikey A26242-ND 1
4 S1 Reset Switch Tactile pushbutton switch Digikey 679-2452-ND 1
5 ISP6 6 pin ISP Header 2x3 pin 0.1” spaced DIL header Digikey 609-3202-ND 1
6 R1 Reset Line Pull-Up Resistor 10,000 ohm resistor Digikey 10KETR-ND 1
7 R2 thru R6 Reset Safety, PULSE, ERROR, PROG, HELLO LED Resistor 1000 ohm resistor Digikey 1.0KQBK-ND 5
8 PROG Indicator LED 3mm LED, White Evil Mad Science 347 1
9 ERROR Indicator LED 3mm LED, Red Evil Mad Science 367 1
10 PULSE Indicator LED 3mm LED, Yellow Evil Mad Science 357 1
11 HELLO Indicator LED 3mm LED, Blue Evil Mad Science 327 1
12 C1 Bypass Capacitor 0.1uF Capacitor Digikey BC1148TR-ND 1
13 C2, C3 Crystal Caps 18pF to 22pF Capacitors Digikey BC1004CT-ND 2
14 XTL Crystal 16 MHz Crystal Digikey XC1721-ND 1
15 U1 ZIF Socket 28 pin ZIF socket, suitable for PDIP parts Evil Mad Science 212 1
16 PCB PCB for ISP Shield Evil Mad Science 681 1