Difference between revisions of "ISP Shield Assembly Instructions"

Revision as of 14:47, 23 March 2011

This is a work in progress, to be finished and posted the week of March 28, 2011.

Line	Ref Des	Description	Type	Vendor	Vendor Part Number	Quantity
1	J1 thru J4	Header set, 6-pin (2 pcs), 8-pin (2 pcs)	Stacking type header, 0.1” spacing	Evil Mad Science	633	1
2	J5	Target Power Enable, Header	3 pin right-angle header, 0.1” spacing	Digikey	TSW-103-25-F-SRA-ND	1
3	J5 (jumper)	Target Power Enable, Jumper	2 pin jumper block, 0.1” spacing	Digikey	A26242-ND	1
4	S1	Reset Switch	Tactile pushbutton switch	Digikey	679-2452-ND	1
5	ISP6	6 pin ISP Header	2x3 pin 0.1” spaced DIL header	Digikey	609-3202-ND	1
6	R1	Reset line pull-up resistor	10k, 1/6 W	Digikey	10KETR-ND	1
7	R2 thru R6	Reset and LED load resistors	1000 ohm, 1/4 W	Digikey	1.0KQBK-ND	5
8	PROG, ERROR, PULSE, HELLO	Indicator LED	3mm, Diffused Yellow	Evil Mad Science	357	4
9	C1	Bypass Capacitor	0.1uF Capacitor	Digikey	BC1148TR-ND	1
10	C2, C3	Capacitors for crystal	18pF, 50 V ceramic	Digikey	BC1004CT-ND	2
11	XTL	Crystal	16 MHz	Digikey	XC1721-ND	1
12	U1	ZIF Dip Socket	28 pin, 0.3" pin spacing	Evil Mad Science	212	1
13	n/a	PCB for ISP Shield	Printed circuit board	Evil Mad Science	681	1

@@ Line 19: / Line 19: @@
 |Stacking type  header, 0.1” spacing
 |Evil Mad Science
-|633
+|[http://evilmadscience.com/productsmenu/partsmenu/251 633]
 |1
 |----
@@ Line 75: / Line 75: @@
 |3mm, Diffused Yellow
 |Evil Mad Science
-|357
+|[http://evilmadscience.com/productsmenu/partsmenu/89-led#3mmdiff 357]
 |4
 |----
@@ Line 115: / Line 115: @@
 |Printed circuit board
 |Evil Mad Science
-|681
+|[http://evilmadscience.com/productsmenu/tinykitlist/254 681]
 |1
 |----
 |}