ISP Shield Assembly Instructions

From Evil Mad Scientist Wiki
Revision as of 14:58, 23 March 2011 by Dhembry (talk | contribs) (Added links to all Digikey parts, added link for Evil Mad Science ZIF socket)
Jump to: navigation, search

This is a work in progress, to be finished and posted the week of March 28, 2011.


Bill of Materials

Line Ref Des Description Type Vendor Vendor Part Number Quantity
1 J1 thru J4 Header set, 6-pin (2 pcs), 8-pin (2 pcs) Stacking type header, 0.1” spacing Evil Mad Science 633 1
2 J5 Target Power Enable, Header 3 pin right-angle header, 0.1” spacing Digikey TSW-103-25-F-SRA-ND 1
3 J5 (jumper) Target Power Enable, Jumper 2 pin jumper block, 0.1” spacing Digikey A26242-ND 1
4 S1 Reset Switch Tactile pushbutton switch Digikey 679-2452-ND 1
5 ISP6 6 pin ISP Header 2x3 pin 0.1” spaced DIL header Digikey 609-3202-ND 1
6 R1 Reset line pull-up resistor 10k, 1/6 W Digikey 10KETR-ND 1
7 R2 thru R6 Reset and LED load resistors 1000 ohm, 1/4 W Digikey 1.0KQBK-ND 5
8 PROG, ERROR, PULSE, HELLO Indicator LED 3mm, Diffused Yellow Evil Mad Science 357 4
9 C1 Bypass Capacitor 0.1uF Capacitor Digikey BC1148TR-ND 1
10 C2, C3 Capacitors for crystal 18pF, 50 V ceramic Digikey BC1004CT-ND 2
11 XTL Crystal 16 MHz Digikey XC1721-ND 1
12 U1 ZIF Dip Socket 28 pin, 0.3" pin spacing Evil Mad Science 212 1
13 n/a PCB for ISP Shield Printed circuit board Evil Mad Science 681 1