Difference between revisions of "Bulbdial Bill of Materials"
From Evil Mad Scientist Wiki
| (One intermediate revision by the same user not shown) | |||
| Line 53: | Line 53: | ||
| 19||4||-||Hex Standoff F/F, Aluminum, 7/8” long, 4-40 thread||||Digi-Key 1809K-ND | | 19||4||-||Hex Standoff F/F, Aluminum, 7/8” long, 4-40 thread||||Digi-Key 1809K-ND | ||
|- | |- | ||
| − | | 20||1||-||Printed Clock face, 1/16” acrylic|||| | + | | 20||1||-||Printed Clock face, 1/16” acrylic||custom|| |
|- | |- | ||
| − | | 21||1||-||Gnomon Spike, Nickel-plated, 3/8” x 4-40 thread||Custom|| | + | | 21||1||-||Gnomon Spike, Nickel-plated, 3/8” x 4-40 thread||Custom plated||Studs and Spikes [http://studsandspikes.com/buy/spike-hex-small-3-8-inch-bag-of-20.html 203-10NB-20] |
|- | |- | ||
| 22||1||-||Button socket cap screw, Stainless, 3/16” x 4-40||||McMaster 92949A105 | | 22||1||-||Button socket cap screw, Stainless, 3/16” x 4-40||||McMaster 92949A105 | ||
Latest revision as of 15:32, 4 January 2013
This wiki page is part of the documentation for the Bulbdial Clock soldering kit.
| Line | Qty | Reference | Value | Evil Mad Scientist Part# | Alt Supplier/Part# |
| 1 | 1 | - | Blue PCB | 952 (set) | |
| 2 | 1 | - | Green PCB | 952 (set) | |
| 3 | 1 | - | Red PCB | 952 (set) | |
| 4 | 12 | JP1, LED1-10 | Zerohm Jumper Wires | Digi-Key ZOR-25-R | |
| 5 | 1 | R11 | Resistor, 10 k Ohm, 1/6 W | Digi-Key 10KEBK-ND | |
| 6 | 9 | R1-R9 | Resistor, 24 Ohm, 1/4 W | Digi-Key 24QTR-ND | |
| 7 | 1 | R10 | Resistor, 68 Ohm, 1/4 W | Digi-Key 68QTR-ND | |
| 8 | 1 | Quartz | Oscillator Crystal, 16 MHz, 20 ppm | 630 (set) | Digi-Key 535-9041-ND |
| 9 | 2 | C1,C2 | Capacitor, 18 pF ceramic | 630 (set) | Digi-Key BC1004CT-ND |
| 10 | 3 | S1,S2,S3 | Tactile button switch, Right angle, long actuator | 9430006 | Digi-Key P10880S-ND |
| 11 | 1 | J2 | Header, male, 6-position SIL, right-angle | 9200007 | Digi-Key WM6106-ND |
| 12 | 2 | M1 | Header, female, 4-position SIL, vertical | 9200013 | Digi-Key S7037-ND |
| 13 | 2 | C3,C6 | Capacitor, 0.1 μF ceramic | Digi-Key BC1148TR-ND | |
| 14 | 1 | U1 | ATmega168-20PU microcontroller, pre-programmed | 1010 | Digi-Key ATMEGA168-20PU-ND |
| 15 | 1 | J1 | Power jack, 2.5 mm | 9200016 | Digi-Key CP-002B |
| 16A (RGB) | 30 | Blue LED, 5mm, Ultrabright, 20° | 9330031 | ||
| 16B (RGB) | 30 | Pure Green LED, 5mm, Ultrabright, 20° | 9330034 | ||
| 16C (RGB) | 12 | Red LED, 5mm, Ultrabright, 20° | Digi-Key C503B-RAN-CY0B0AA1-ND | ||
| 16 (Monochrome) | 72 | White LED, 5 mm, Ultrabright, 20° | 9330043 | ||
| 17 | 1 | - | Custom LED Bending Guide, 6 mm plywood | Custom | |
| 18 | 8 | - | Hex Standoff M/F, Aluminum, 3/8” long, 4-40 thread | Digi-Key 8400K-ND | |
| 19 | 4 | - | Hex Standoff F/F, Aluminum, 7/8” long, 4-40 thread | Digi-Key 1809K-ND | |
| 20 | 1 | - | Printed Clock face, 1/16” acrylic | custom | |
| 21 | 1 | - | Gnomon Spike, Nickel-plated, 3/8” x 4-40 thread | Custom plated | Studs and Spikes 203-10NB-20 |
| 22 | 1 | - | Button socket cap screw, Stainless, 3/16” x 4-40 | McMaster 92949A105 | |
| 23 | 1 | - | Hex wrench, 1/16” | McMaster 7122A14 | |
| 24 | 8 | - | Button socket cap screw, Stainless, 3/8” x 4-40 | McMaster 92949A108 | |
| 25 | 1 | - | Power adapter, 5V, 150 mA minimum, Center positive | 9800002 | |
| 26 | 4 | - | Washer, Nylon, 1/16” x #4 washer | McMaster 90295A345 | |
| 27 | 1 | C5 | Capacitor, 100 μF electrolytic | Digi-Key 493-1040-ND |
