Difference between revisions of "Larson Scanner Bill of Materials"
From Evil Mad Scientist Wiki
| Line 17: | Line 17: | ||
| 3||1||S1||2 pin tactile button switch||[http://evilmadscience.com/productsmenu/partsmenu/520 9430004]||Digi-Key CKN9102-ND | | 3||1||S1||2 pin tactile button switch||[http://evilmadscience.com/productsmenu/partsmenu/520 9430004]||Digi-Key CKN9102-ND | ||
|- | |- | ||
| − | | 4||1||ATtiny2313||ATtiny2313A Microcontroller||[http://evilmadscience.com/productsmenu/partsmenu/500 9320010] (bare) or [http://evilmadscience.com/productsmenu/partsmenu/132 1001] (preprogrammed)||Digi-Key ATtiny2313A-PU-ND | + | | 4||1||ATtiny2313||ATtiny2313A or ATtiny4313 Microcontroller||[[http://evilmadscience.com/productsmenu/partsmenu/500 9320010] (bare '2313), [http://evilmadscience.com/productsmenu/partsmenu/501 9320007] (bare '4313) or [http://evilmadscience.com/productsmenu/partsmenu/132 1001] (preprogrammed)||Digi-Key ATtiny2313A-PU-ND |
|- | |- | ||
| 5||1||V+,V-||2xAA battery holder with switch||[http://evilmadscience.com/productsmenu/partsmenu/413 9420001]||Digi-Key SBH321AS-ND | | 5||1||V+,V-||2xAA battery holder with switch||[http://evilmadscience.com/productsmenu/partsmenu/413 9420001]||Digi-Key SBH321AS-ND | ||
Revision as of 13:31, 24 June 2014
This page is part of the documentation for the Larson Scanner kit.
| Line | Qty | Reference | Value | Evil Mad Scientist Part# | Alt Supplier/Part# |
| 0 | 1 | PCB | ix PCB | 9600015 | |
| 1 | 10 | R0-R8 | 16 ohm resistor | 9100006 | Digi-Key 16QTR-ND |
| 2 | 1 | C1 | 0.1 uF ceramic capacitor | Digi-Key BC1148TR-ND | |
| 3 | 1 | S1 | 2 pin tactile button switch | 9430004 | Digi-Key CKN9102-ND |
| 4 | 1 | ATtiny2313 | ATtiny2313A or ATtiny4313 Microcontroller | [9320010 (bare '2313), 9320007 (bare '4313) or 1001 (preprogrammed) | Digi-Key ATtiny2313A-PU-ND |
| 5 | 1 | V+,V- | 2xAA battery holder with switch | 9420001 | Digi-Key SBH321AS-ND |
| 6 | 10 | D0-D8 | Red LED, up to 10 mm size | various |
