Difference between revisions of "ISP Shield Assembly Instructions"
From Evil Mad Scientist Wiki
(Created page with "{| border="1" cellspacing="0" cellpadding="5" | |Line |refdes |Name |Description |Vendor |Part Number |Quantity per Board |---- |1 |J1 thru J4 |Arduino Headers, six and eight pin...") |
|||
Line 1: | Line 1: | ||
+ | == Bill of Materials == | ||
+ | |||
{| border="1" cellspacing="0" cellpadding="5" | | {| border="1" cellspacing="0" cellpadding="5" | | ||
|Line | |Line | ||
− | | | + | |Ref Des |
− | |||
|Description | |Description | ||
+ | |Type | ||
|Vendor | |Vendor | ||
− | |Part Number | + | |Vendor Part Number |
− | |Quantity per | + | |Quantity per Kit |
|---- | |---- | ||
|1 | |1 |
Revision as of 20:09, 22 March 2011
Bill of Materials
Line | Ref Des | Description | Type | Vendor | Vendor Part Number | Quantity per Kit |
1 | J1 thru J4 | Arduino Headers, six and eight pin, two of each | Evil Mad Science | 633 | 1 | |
2 | J5 | Target Power Enable, Header | 3 pin Right Angle 0.1” spaced header | Digikey | TSW-103-25-F-SRA-ND | 1 |
3 | Target Power Enable, Jumper | 2 pin jumper block for 0.1” header | Digikey | A26242-ND | 1 | |
4 | S1 | Reset Switch | Tactile pushbutton switch | Digikey | 679-2452-ND | 1 |
5 | ISP6 | 6 pin ISP Header | 2x3 pin 0.1” spaced DIL header | Digikey | 609-3202-ND | 1 |
6 | R1 | Reset Line Pull-Up Resistor | 10,000 ohm resistor | Digikey | 10KETR-ND | 1 |
7 | R2 thru R6 | Reset Safety, PULSE, ERROR, PROG, HELLO LED Resistor | 1000 ohm resistor | Digikey | 1.0KQBK-ND | 5 |
8 | PROG | Indicator LED | 3mm LED, White | Evil Mad Science | 347 | 1 |
9 | ERROR | Indicator LED | 3mm LED, Red | Evil Mad Science | 367 | 1 |
10 | PULSE | Indicator LED | 3mm LED, Yellow | Evil Mad Science | 357 | 1 |
11 | HELLO | Indicator LED | 3mm LED, Blue | Evil Mad Science | 327 | 1 |
12 | C1 | Bypass Capacitor | 0.1uF Capacitor | Digikey | BC1148TR-ND | 1 |
13 | C2, C3 | Crystal Caps | 18pF to 22pF Capacitors | Digikey | BC1004CT-ND | 2 |
14 | XTL | Crystal | 16 MHz Crystal | Digikey | XC1721-ND | 1 |
15 | U1 | ZIF Socket | 28 pin ZIF socket, suitable for PDIP parts | Evil Mad Science | 212 | 1 |
16 | PCB | PCB for ISP Shield | Evil Mad Science | 681 | 1 |