Difference between revisions of "Breadboard Menorah Bill of Materials"
From Evil Mad Scientist Wiki
Line 9: | Line 9: | ||
| 1||Transparent Breadboard with scored paper backing||[http://shop.evilmadscientist.com/productsmenu/partsmenu/623-breadboard 9250005] (without scored backing)|| | | 1||Transparent Breadboard with scored paper backing||[http://shop.evilmadscientist.com/productsmenu/partsmenu/623-breadboard 9250005] (without scored backing)|| | ||
|- | |- | ||
− | | 1|| | + | | 1||ATtiny2313 or '4313 Microcontroller||[http://evilmadscience.com/productsmenu/partsmenu/500 9320010] (bare '2313), [http://evilmadscience.com/productsmenu/partsmenu/501 9320007] (bare '4313) or [http://evilmadscience.com/productsmenu/partsmenu/132 1018] (preprogrammed)|| |
|- | |- | ||
| 1||2-pin Tactile Button Switch||[http://evilmadscience.com/productsmenu/partsmenu/520 9430004]|| | | 1||2-pin Tactile Button Switch||[http://evilmadscience.com/productsmenu/partsmenu/520 9430004]|| |
Latest revision as of 13:13, 24 June 2014
This page is part of the documentation for the Deluxe Electronic Breadboard Menorah Kit.
Quantity | Component | Evil Mad Scientist Part # | Alt Supplier/Part # |
1 | Transparent Breadboard with scored paper backing | 9250005 (without scored backing) | |
1 | ATtiny2313 or '4313 Microcontroller | 9320010 (bare '2313), 9320007 (bare '4313) or 1018 (preprogrammed) | |
1 | 2-pin Tactile Button Switch | 9430004 | |
1 | 3xAA Battery box with 2-pin header soldered to wire leads | 9420002 (without soldered header) | |
1 | 0.1uF Ceramic Capacitor | Digi-Key BC1148TR-ND | |
2 | 10 mm Red LED | 9330086 | |
1 | 10 mm Orange LED | 9330091 | |
1 | 10 mm Yellow LED | 9330022 | |
1 | 10 mm Green LED | 9330009 | |
2 | 10 mm Blue LED | 9330007 | |
2 | 10 mm Warm White LED | 9330062 | |
10 | Zero-ohm Jumper | 9100023 | |
2 | Resistor: 150 ohm | 9100005 | |
1 | Resistor: 75 ohm | 9100020 | |
1 | Resistor: 51 ohm | 9100024 | |
1 | Resistor: 39 ohm | 9100013 | |
2 | Resistor: 16 ohm | 9100006 | |
2 | Resistor: 100 ohm | 9100001 |