Difference between revisions of "WaterColorBot Paper"

From Evil Mad Scientist Wiki
Jump to: navigation, search
(Created page with "{{WaterColorBotDocs}} == WaterColorBot Paper == The WaterColorBot is designed to fit 9x12” watercolor paper (one of the most common sizes), and to paint up to within 1/2...")
 
Line 25: Line 25:
 
• Other types of paper not intended for watercolor often work quite well. We’re particularly fond of painting on “bristol board” drawing paper.
 
• Other types of paper not intended for watercolor often work quite well. We’re particularly fond of painting on “bristol board” drawing paper.
  
• Paper tends to warp as it gets wet, particularly with uneven wetting and lower grades of paper.  Methods of dealing with this include pre-wetting and stretching paper, as well as holding paper down with tape or in blocks. Watercolor painting is an old art, and people have been solving these problems for hundreds of years; read up on the subject online or in books.  
+
• Paper tends to warp as it gets wet, particularly with uneven wetting and lower grades of paper.  Methods of dealing with this include pre-wetting and stretching paper, as well as holding paper down with tape or in blocks. Watercolor painting is an old art, and people have been solving these problems for hundreds of years; read up on the subject online or in books.
 
 
 
 
'''''More info: Coming week of November 10, 2013.'''''
 

Revision as of 19:23, 16 November 2013

wcb_tn.jpg This wiki page is part of the documentation for the WaterColorBot.
Click here to return to the WaterColorBot overview.


WaterColorBot Paper

The WaterColorBot is designed to fit 9x12” watercolor paper (one of the most common sizes), and to paint up to within 1/2” of the edges.


Overall paper size: 9x12” (22.8 cm x 30.5 cm)

Margin width: 1/2” (12.7 mm)

Painting area (inside margins): 8x11” (20.3 cm x 27.9 cm)


For US Letter and A4 paper sizes— both a little smaller than 9x12” —align the paper to the top, and center it, using the marks provided on the spoilboard.

• You can use smaller-yet paper (e.g., notecards) on the WaterColorBot, even if they don’t fill up the spoilboard. The best ways to do so are to either affix it to a larger sheet of paper (9x12”, US letter or A4) with masking tape, or to clip it above larger paper on the spoilboard.

• Other types of paper not intended for watercolor often work quite well. We’re particularly fond of painting on “bristol board” drawing paper.

• Paper tends to warp as it gets wet, particularly with uneven wetting and lower grades of paper. Methods of dealing with this include pre-wetting and stretching paper, as well as holding paper down with tape or in blocks. Watercolor painting is an old art, and people have been solving these problems for hundreds of years; read up on the subject online or in books.