Googly Assembly Instructions

This page walks through the process of assembling the Googly Eye Shield for Arduino.

Bill of Materials, or, "What's in the kit?"

Line	Ref Des	Quantity	Description	Type	Vendor	Vendor Part Number
1	n/a	1	PCB for ISP Shield 2.0	Printed circuit board	Evil Mad Science	60-0030
2	J1 thru J4	1	Header set, 6-pin (2 pcs), 8-pin (2 pcs)	Stacking type header, 0.1” spacing	Evil Mad Science	633
3	n/a	4	Glue dot	3/16" Diameter	Oriental Trading	73/10034
4	n/a	2	Googly Eye, large	15 mm diameter	Micheals	400100231388
4	n/a	2	Googly Eye, small	8 mm diameter	Micheals	400100231050

Assembly procedure

We'll go line by line through the kit components. This guide assumes that you have had some soldering experience. If not, or it's been a while, you may also want to look at pages 2 and 5-7 of the Bulbdial clock assembly instructions, which go over basic tools and technique. And, if you really are a beginner, there are plenty of good tutorials on line, like this one.