Art Controller Bill of Materials
From Evil Mad Scientist Wiki
This wiki page is part of the documentation for the Art Controller soldering kit.
| Line | Qty | Reference | Value | Vendor | Vendor Part Number |
| 1 | 1 | Art Controller PCB | Evil Mad Science | 9600034 | |
| 2 | 3 | R1-3 | Resistor: 1K | Digi-Key | 1.0KQBK-ND |
| 3 | 2 | D1-2 | Diode, Schottky 1N5817 20V 1A DO-41 | Digi-Key | 1N5817-TPCT-ND |
| 4 | 3 | C2-4 | Cap, 0.1uF, 25V, ceramic, radial | Digi-Key | BC1148TR-ND |
| 5 | 2 | D3-4 | LED, 3 mm Yellow diffused | Evil Mad Science | 9330030 |
| 6 | 1 | C1 | Cap, 10uF, 50V, electrolytic | Digi-Key | P997-ND |
| 7 | 1 | C5 | Cap, 100uF, 10V, electrolytic | Digi-Key | P963-ND |
| 8 | 1 | Q1 | 2N4401TFR | Digi-Key | 2N4401D26ZCT-ND |
| 9 | 1 | U1 | 7805, 1 A Linear Regulator | Digi-Key | MC7805CTGOS-ND |
| 10 | 1 | U1 | 6-32 x 1/4 inch Screw, PH Cheese | McMaster-Carr | 91737A105 |
| 11 | 1 | U1 | 6-32 Kep Nut | McMaster-Carr | 90675A007 |
| 12 | 1 | J4 | Header, 6 pin DIL | Evil Mad Science | 9200005 |
| 13 | 1 | ATtiny2313 | Socket, DIP, 20 pin | Evil Mad Science | 9220001 |
| 14 | 1 | Jumpers | 8 position DIP switch | Evil Mad Science | 9430008 |
| 15 | 2 | J1-2 | Terminal Block, 2-pin Euro | Evil Mad Science | 9250002 |
| 16 | 1 | J3 | 3 position 5.08 mm Terminal Block | Digi-Key | ED2610-ND |
| 17 | 1 | Relay | 5 V 5 A SPDT Relay | Digi-Key | Z2560-ND |
| 18 | 1 | Attiny2313 | ATtiny2313A-PU | Evil Mad Science | 9320010 |
| 19 | - | J5 | Power Jack (optional) | Evil Mad Science | 9200015 |
