ISP Shield Assembly Instructions
From Evil Mad Scientist Wiki
| Line | refdes | Name | Description | Vendor | Part Number | Quantity per Board |
| 1 | J1 thru J4 | Arduino Headers, six and eight pin, two of each | Evil Mad Science | 633 | 1 | |
| 2 | J5 | Target Power Enable, Header | 3 pin Right Angle 0.1” spaced header | Digikey | TSW-103-25-F-SRA-ND | 1 |
| 3 | Target Power Enable, Jumper | 2 pin jumper block for 0.1” header | Digikey | A26242-ND | 1 | |
| 4 | S1 | Reset Switch | Tactile pushbutton switch | Digikey | 679-2452-ND | 1 |
| 5 | ISP6 | 6 pin ISP Header | 2x3 pin 0.1” spaced DIL header | Digikey | 609-3202-ND | 1 |
| 6 | R1 | Reset Line Pull-Up Resistor | 10,000 ohm resistor | Digikey | 10KETR-ND | 1 |
| 7 | R2 thru R6 | Reset Safety, PULSE, ERROR, PROG, HELLO LED Resistor | 1000 ohm resistor | Digikey | 1.0KQBK-ND | 5 |
| 8 | PROG | Indicator LED | 3mm LED, White | Evil Mad Science | 347 | 1 |
| 9 | ERROR | Indicator LED | 3mm LED, Red | Evil Mad Science | 367 | 1 |
| 10 | PULSE | Indicator LED | 3mm LED, Yellow | Evil Mad Science | 357 | 1 |
| 11 | HELLO | Indicator LED | 3mm LED, Blue | Evil Mad Science | 327 | 1 |
| 12 | C1 | Bypass Capacitor | 0.1uF Capacitor | Digikey | BC1148TR-ND | 1 |
| 13 | C2, C3 | Crystal Caps | 18pF to 22pF Capacitors | Digikey | BC1004CT-ND | 2 |
| 14 | XTL | Crystal | 16 MHz Crystal | Digikey | XC1721-ND | 1 |
| 15 | U1 | ZIF Socket | 28 pin ZIF socket, suitable for PDIP parts | Evil Mad Science | 212 | 1 |
| 16 | PCB | PCB for ISP Shield | Evil Mad Science | 681 | 1 |
