Difference between revisions of "Breadboard Menorah Alternate Build"
From Evil Mad Scientist Wiki
(Created page with "Alternate build notes for the breadboard menorah with the shamash on the end * The 51 ohm resistor goes from 31 c to 32 c * The Yellow LED goes from 30 a to 30 blue stripe up...") |
(No difference)
|
Revision as of 18:33, 17 November 2013
Alternate build notes for the breadboard menorah with the shamash on the end
- The 51 ohm resistor goes from 31 c to 32 c
- The Yellow LED goes from 30 a to 30 blue stripe upper side
- The switch goes in row i (instead of j) from 30 to 33
- Use a clipped lead from one of the resistors (ideally from one of the 0.4” length) to make an extra 0.4” jumper (which will look like a staple) to go from 32 j to the lower blue stripe
- One of the 0.5” jumpers should be made 0.7” instead and will go from 50 f to 55 c
- One more of the 0.5” jumpers should be left straight
- For the Red LED on the end, twist one jumper to each leg, and insert from 55 a to the blue stripe
