Editing Inkscape and WaterColorBot
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.
The edit can be undone.
Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 14: | Line 14: | ||
== Getting the software == | == Getting the software == | ||
− | |||
− | + | Installing Inkscape: | |
+ | * Begin by downloading and installing Inkscape, version 0.91. You can find Inkscape https://inkscape.org/en/release/0.91/platforms/ here]. | ||
+ | * If you are using a Mac (MacOS version 10.6 or newer), download and install the latest release of [http://xquartz.macosforge.org/landing/ XQuartz] | ||
+ | * If you are using a Linux version for which there is not a pre-compiled version of Inkscape, [https://gist.github.com/jeffkayser/4637089d3c11546e6d4f this page] may be helpful in compiling Inkscape 0.91 source on Ubuntu / Debian] | ||
− | + | Installing the extensions | |
+ | * Make sure that you've already installed Inkscape | ||
+ | * Download the software from [https://github.com/evil-mad/wcb-ink/releases our github repository]. | ||
+ | * Mac & Windows: Please use the dedicated installer for your platform. | ||
+ | * Linux: Please manually install the extensions | ||
− | |||
− | The biggest difference between the | + | Manual installation of extensions for Linux: |
+ | * Download source code zip file from [https://github.com/evil-mad/wcb-ink/releases our github repository] and unzip | ||
+ | * Move or copy the contents of the "extensions" directory into $HOME/.config/inkscape/extensions | ||
+ | * Move or copy the contents of the "templates" directory into $HOME/.config/inkscape/templates | ||
+ | |||
+ | |||
+ | USB Driver (Windows only): | ||
+ | * A USB driver is also required for Windows. The Windows installer now installs this driver (assuming that you grant it permission). | ||
+ | |||
+ | == Special information for Eggbot users == | ||
+ | |||
+ | The WaterColorBot Control extension is based on our [[Eggbot Control]] extension that operates the Eggbot. If you have had some experience with the Eggbot, you will find most controls to be the same. In particular, you may have had some experience with making a multi-color drawing with the Eggbot, by putting paths that you want to print in different colors on different layers. | ||
+ | |||
+ | The biggest difference between the two machines is that since the WaterColorBot can perform automatic paint color changes-- unlike the Eggbot --it ''requires'' that you use multiple named layers when multicolor painting is enabled. | ||