Difference between revisions of "Snap-O-Lantern Bill of Materials"
From Evil Mad Scientist Wiki
| Line 7: | Line 7: | ||
| 1||1||ATtiny2313 Target Board||[http://shop.evilmadscientist.com/productsmenu/tinykitlist/112 9600007] | | 1||1||ATtiny2313 Target Board||[http://shop.evilmadscientist.com/productsmenu/tinykitlist/112 9600007] | ||
|- | |- | ||
| − | | 2|| | + | | 2||2||Pair of insulated copper wires|| N/A |
|- | |- | ||
| − | | 3||2|| | + | | 3||2||LED, 10 mm Orange diffused tinted lens||[http://shop.evilmadscientist.com/productsmenu/partsmenu/660 9330091] |
|- | |- | ||
| − | | 4|| | + | | 4||1||Socket, DIP, 20 pin||[http://shop.evilmadscientist.com/productsmenu/partsmenu/273 9220001] |
|- | |- | ||
| − | | 5|| | + | | 5||2||1K ohm resistor||[http://shop.evilmadscientist.com/productsmenu/partsmenu/234 9100041] |
|- | |- | ||
| − | | 6|| | + | | 6||4||Zero-ohm Jumper||[http://shop.evilmadscientist.com/productsmenu/partsmenu/234 9100023] |
|- | |- | ||
| − | | 7|| | + | | 7||1||Header, 6 pin DIL||[http://shop.evilmadscientist.com/productsmenu/partsmenu/143 9200005] |
|- | |- | ||
| 8||1||Battery box, 3xAA||[http://shop.evilmadscientist.com/productsmenu/partsmenu/414 9420002] | | 8||1||Battery box, 3xAA||[http://shop.evilmadscientist.com/productsmenu/partsmenu/414 9420002] | ||
Revision as of 12:51, 15 October 2013
| Line | Qty | Value | Evil Mad Scientist Part No. |
| 1 | 1 | ATtiny2313 Target Board | 9600007 |
| 2 | 2 | Pair of insulated copper wires | N/A |
| 3 | 2 | LED, 10 mm Orange diffused tinted lens | 9330091 |
| 4 | 1 | Socket, DIP, 20 pin | 9220001 |
| 5 | 2 | 1K ohm resistor | 9100041 |
| 6 | 4 | Zero-ohm Jumper | 9100023 |
| 7 | 1 | Header, 6 pin DIL | 9200005 |
| 8 | 1 | Battery box, 3xAA | 9420002 |
| 9 | 1 | ATtiny2313A-PU | 9320010 |
| 10 | 1 | Micro Servo Motor | 9400003 |
| 11 | 1 | Servo Horn Extender | Custom fabricated, laser-cut plastic |
| 12 | 2 | No. 1 x 3/16" Phillips Screw | McMaster-Carr #92470A049 |
| 13 | 6 | Toothpick | N/A |
