Difference between revisions of "AYAB KH-900"
From Evil Mad Scientist Wiki
(Create (partially...)) |
(Add first pictures) |
||
| Line 1: | Line 1: | ||
{{AYABDocs}} | {{AYABDocs}} | ||
| + | |||
| + | == Introduction == | ||
This page contains documentation about how to physically connect your AYAB Interface to your knitting machine. | This page contains documentation about how to physically connect your AYAB Interface to your knitting machine. | ||
This page shows how to connect the AYAB Interface from Evil Mad Scientist to your Brother KH-900 knitting machines, and to similar machines such as the Knitking CompuKnit ST. For other hardware, please see our main [[AYAB_Hardware_Installation|AYAB Hardware Installation]] page. | This page shows how to connect the AYAB Interface from Evil Mad Scientist to your Brother KH-900 knitting machines, and to similar machines such as the Knitking CompuKnit ST. For other hardware, please see our main [[AYAB_Hardware_Installation|AYAB Hardware Installation]] page. | ||
| + | |||
| + | |||
| + | == Installation instructions == | ||
| + | |||
| + | <img src="http://cdn.evilmadscientist.com/wiki/ayab/installation/900-closed@2x.jpg" width="800" height="316" > | ||
| + | |||
| + | This is the Brother KH-900 knitting machine. Remove the two screws on top of the machine that hold the right part of the top cover in place. | ||
| + | |||
| + | <img src="http://cdn.evilmadscientist.com/wiki/ayab/installation/900-cover@2x.jpg" width="800" height="387" > | ||
| + | |||
| + | After removing those screws, the right part of the top cover can be lifted out of place. | ||
| + | |||
| + | <img src="http://cdn.evilmadscientist.com/wiki/ayab/installation/900-cover2@2x.jpg" width="800" height="387" > | ||
| + | |||
| + | |||
| + | |||
| + | <img src="http://cdn.evilmadscientist.com/wiki/ayab/installation/900-complete@2x.jpg" width="800" height="243" > | ||
Revision as of 01:15, 12 December 2016
Introduction
This page contains documentation about how to physically connect your AYAB Interface to your knitting machine.
This page shows how to connect the AYAB Interface from Evil Mad Scientist to your Brother KH-900 knitting machines, and to similar machines such as the Knitking CompuKnit ST. For other hardware, please see our main AYAB Hardware Installation page.
Installation instructions
This is the Brother KH-900 knitting machine. Remove the two screws on top of the machine that hold the right part of the top cover in place.
After removing those screws, the right part of the top cover can be lifted out of place.
