Difference between revisions of "Update Eggbot software for Engraver Kit"

From Evil Mad Scientist Wiki
Jump to: navigation, search
Line 2: Line 2:
  
  
The Eggbot engraving tool requires version 2.2.1 or newer of the Eggbot extensions for Inkscape. If you have already installed the extensions, you can check your version number (see instructions [[Eggbot_Control#.2A|here]]). If you are installing the software for the first time, please follow the instructions [[Installing_software|here]].
+
The [[Engraver|Eggbot engraving tool]] requires version 2.2.1 or newer of the Eggbot extensions for Inkscape. If you have already installed the extensions, you can check your version number (see instructions [[Eggbot_Control#.2A|here]]). If you are installing the software for the first time, please follow the instructions [[Installing_software|here]].
  
  

Revision as of 13:00, 21 June 2011

This wiki page is part of the documentation for The Original Egg-Bot.
Click here to return to the Egg-Bot overview.


The Eggbot engraving tool requires version 2.2.1 or newer of the Eggbot extensions for Inkscape. If you have already installed the extensions, you can check your version number (see instructions here). If you are installing the software for the first time, please follow the instructions here.


If you have an earlier version, the particulars of updating your extensions depend on the operating system:


Mac

  • Recommended method: Download the Mac installer package from the EggBotCode Google Code site. Run the installer (a standard Mac installer package) to install the Eggbot extensions. The installer requires MacOS 10.4 or newer.
  • Alternate method, Manual installation: Download the latest version of the Inkscape extension (not the mac installer) from the EggBotCode Google Code site. Copy the entire contents of the Eggbot software archive to /Applications/Inkscape.app/Contents/Resources/extensions/ and restart Inkscape.
  • The new version number should show up on the * tab of the Eggbot Control Extension after you restart Inkscape.


Windows

  • Recommended method: Download the latest version of the Windows installer package from the EggBotCode Google Code site. Run the installer (a standard Windows installer package) to install the Eggbot extensions.
  • Alternate method, Manual installation: Download the latest version of the Inkscape extension (not the Windows installer) from the EggBotCode Google Code site. Copy the entire contents of the Eggbot software archive into (Program files)\Inkscape\share\extensions\ and restart Inkscape.
  • The new version number should show up on the * tab of the Eggbot Control Extension after you restart Inkscape.


Linux

The Eggbot extension for Inkscape has been developed and tested extensively under Ubuntu 10.04 (Lucid Lynx). We expect it to work equally well in other distributions where Inkscape is known to work. Ubuntu install instructions:

  • Download the latest Inkscape extension .ZIP file from the downloads section of EggBotCode Google Code site.
  • From the "Places" menu, open your Home Folder.
  • From the "View" menu select "Show hidden files" -- the .config folder should be visible.
  • Place the contents of the folder inside the ZIP archive inside .config/inkscape/extensions/
  • The new version number should show up on the * tab of the Eggbot Control Extension after you restart Inkscape.


Troubleshooting

  • If you encounter difficulty updating the Eggbot extensions for Inkscape, please request assistance through the Eggbot mailing list or forum, which you can find on our front page.
  • If there is any chance that a problem you encounter is specific to Eggbot software or hardware, it is important that you do not directly seek assistance through Inkscape's support resources. You're much more likely to get your problem solved by asking people who know about Eggbot. And, we'd like the Inkscape team to be ready to help us when we do encounter Inkscape-specific issues.